Products List
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Base Washer for 5 lb. Vertical Stuffer (606, 606SS)
$2.49Base Washer for the 5 lb. vertical stuffer, SKUs 606 and 606SS. The Base Washer is used with the Base Nut to attach the frame to the base of the unit. The Base Washer goes onto the screw before the... -
Heat Wire 1 - 3 mm for 1380
$3.99The 3 mm Heating Wire for the 1380 MaxVac Pro Chamber Sealer. Should be purchased with the 1 mm Wire (SKU 10104003) and Teflon Belt (SKU 10074001) Dimensions: 18.70" x 0.12" Material: Nickel -
Complete Air Release Valve (1606, 1606SS, 1569)
$6.99This is the Complete Air Release Valve for our 5 lb. MightyBite Stuffers and BigBite 10 lb. Motorized Stuffer. Construction: SUS304 Stainless Steel Dimensions: 1.42" length; 0.8" outer... -
Coarse Grinder Plate for #10 Stainless Steel Hand Grinder (058, 821)
$9.99Replacement 10 mm Plate for #10 Tinned Clamp on Hand Grinder (SKU 058, with LEM on the side) and SKU 821 Stainless Steel Clamp-on Hand Grinder. If the side of your grinder has Porkert or Alfa, they... -
Bearing 1 for BigBite® Mixers (1733, 1734, 1868, 1869)
$4.49Bearing 1 for our current generation BigBite Mixers. There are four of them located in the gear box (sold individually). Bearing labeled 6002z. It is labelled part 11 in the manual of our current... -
Heater for 20 lb. Smoker (738)
$8.99Heating element for 20 lb. smoker, SKU 738. The heating element is used to heat the smoker and is located inside of the unit on top of the heater bracket.View 738 Manual Here Parts are only included... -
Threaded Rod for 5 lb. Vertical Stuffer (606, 606SS)
$21.99Parts are only included in part-specific promotions. -
Circuit Breaker for #22 & 32 BigBite® Grinders (781, 781A, 782, 782A)
$4.99The BigBite Circuit Breaker residing within the motor housing. Parts are only included in part-specific promotions. -
Oil Cap with O-Ring for MaxVac® Pro Chamber Sealer (1380)
$14.99Black Oil Cap assembly that is removed to fill oil reservoir. Also includes the rubber O-Ring that fits between the Oil Cap and the reservoir housing. Construction: Reinforced nylon; 2-piece... -
Drive Shaft Key for Tilt Mixers (1868, 1869, 868, 869)
$3.99Axle Drive Shaft Key for Tilt Mixers. The Drive Shaft Key attaches to the end of the Axle Drive Shaft. Parts are only included in part-specific promotions. -
Cylinder for 10 lb. Motorized Stuffer (1569)
$190.99Meat Cylinder for the BigBite 10 lb. Motorized Stuffer (1569). Construction: SUS304 stainless steel Dimensions: 6.3" diameter; 9.84" height -
Wire Shelf for 20 lb. Smoker (738) & Stainless Steel Dehydrator (778, 778A, 1154)
$8.99Wire shelf for 20 lb. smoker, SKU 738 and stainless-steel dehydrator SKUs 778, 778A and 1154. This shelf is 16" x 14.5". We recommend hand washing and drying these shelves.View 738 Manual HereView...