Products List
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Stuffing Tube for Meat Grinder (1113, 1224)
$4.99Parts are only included in part-specific promotions. -
Stainless Auger Stud for #5 BigBite® Grinder (1777, 777, 777A)
$6.99Stainless steel auger stud for #5 electric grinder, SKUs 1777, 777 & 777A. This stud screws into the auger and holds the knife and the plate. Parts are only included in part-specific promotions. -
Retaining Ring for Larger Sausage Stuffers (1906, 1219, 1217, 1569, 1607)
$4.99This retaining ring slides over the stuffing tube and screws onto the front of the cylinder to hold the stuffing tube in place. Compatible with our 15 lb. MightyBite Sausage Stuffers and BigBite... -
Grease Seal for BigBite® Mixers (1733, 1734, 1868, 1869)
$10.99The Grease Seal for our current generation BigBite Mixers. Located within the tub on the gearbox side. Caution: This part is for our current generation Stand and Tilt Mixers only. They are not... -
Handle Screw for #12, 22 & 32 BigBite® Grinders (780, 781, 782, 777A, 779A, 780A, 1780, 1781, 1782)
$3.99The Handle Screw attaches the handle to the grinder motor.View 780, 781 & 782 Product Manual M6 -1.0 x 15 Parts are only included in part-specific promotions. -
Axle Adjusting Knob for Mixer (654, 868, 869)
$3.99Axle Adjusting Knob for Mixer SKUs 654, 868 and 869. The Axle Adjusting Knob is used with the Spring (SKU 02038001) and the Brass Bolt (SKU 02039001) to adjust the P -
Rubber Foot Set of 4 for MaxVac® 250 (1393)
$3.99The black rubber feet for our MaxVac® 250 vacuum sealer (set of 4). Construction: Silicone Dimensions: 0.49" diameter x 0.16" height View 1393 Product Manual Parts are only included in... -
Cutter Group (1253, 1088B)
$3.99The cutter group is the sliding blade with finger tab that cuts the vacuum bags in our Role Holder and Cutter (Found on our MaxVac 500 and 1000 series sealers as well as the stand-alone bag holder... -
#12 Grinder Head for 2017+ Grinder (1780)
$139.99This #12 Stainless Steel BigBite Grinder Head houses the BigBite Auger and attaches to the unit's Motor Housing. This part is for LEM BigBite Grinder (SKU 1780), made in 2017 or newer. Parts are... -
Frame for 5 lb. Vertical Stuffer (606, 606SS)
$51.99Frame for the 5 lb. vertical stuffer with silver gears only, SKUs 606 & 606SS. The frame is the T-shaped steel unit that the cylinder sits in, along with the gear shaft and handle. View 606 & 606SS... -
Plastic Large Outlet Gear for Meat Grinder (1113, 1224)
$3.99All plastic. Part numbers 1113-25 and 1113-25A are NOT interchangeable. Please take note of the gear on your unit and order appropriately. The gear you need depends upon the length of the gear shaft... -
Stainless Retaining Ring for #32 BigBite® Grinder (782)
$82.99Stainless steel retaining ring for a #32 1.5 HP grinder (SKU 782). This ring screws onto the front of the grinder head to hold in the knife, the plate, and the stuffing tube, if a stuffing tube is...