Products List
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Piston Gasket for 10 lb. BigBite® Dual Gear Stuffer (1112)
$9.99Piston gasket for 10 lb. BigBite Dual Gear Stuffer (SKU 1112). The piston gasket fits into the groove on the piston. It acts as a buffer to keep the meat from coming back up the cylinder as the... -
Horizontal Gear Bushing (1606, 1606SS)
$3.99Horizontal gear bushing for the MightyBite 5 lb. Stuffer, SKUs 1606 and 1606SS. Construction: POM Dimensions: 1.20" length x 0.65" inner diameter Parts are only included in part-specific promotions. -
Axle Bushing for 25 lb. and 50 lb. Mixers (733, 734, 733A, 734A, 868, 869)
$3.99The Axle Bushing is located at the end of the Axle. The Axle Adjuster connects to the Axle Bushing. Diameter: 0.87" Length: 0.47" Material: PA1010 View 733 & 734 Product Manual -
Locking Screw Cover for #10 Tinned Hand Grinder (058)
$3.99Replacement Locking Screw Cover for #10 Tinned Clamp on Hand Grinder (SKU 058, with LEM on the side).This part is special to this grinder. You must make sure that your grinder head has LEM on both... -
Grinder Knife for #10 Stainless Steel Hand Grinder (058, 821)
$14.99Replacement knife for the #10 Tinned Clamp-on Hand Grinder (SKU 058, with LEM on the side) and Stainless Steel Clamp-on Hand Grinder (SKU 821). If the side of your grinder has Porkert or Alfa, they... -
Gear Shaft 2 for 10 lb. Motorized Stuffer (1569)
$39.99This is the second cylindrical gear within the BigBite 10 lb. Motorized Stuffer. Part number 6 on the parts diagram. Construction: 45# Carbon Steel Dimensions: .83" length x 3.07" width -
Teflon Tape for Top Lid & Under Heat Bar for MaxVac® Vacuum Sealers (1088, 1088A, 1253)
$3.99This tape is used on the vacuum lid of the MaxVac® Sealer, as well as underneath the heating element. If you need the tape that lies on top of the heating element, order SKU 10118004. This part will... -
Handle for 20 lb. Manual Mixer (654)
$26.99Handle for the 20 lb. Manual Mixer (SKU 654). The Handle is what turns the mixing paddles in this unit. You may also need a new Handle Bolt (SKU 02039002) with your han -
Head/Main Body for #32 Leonardi Grinder (540)
$221.99Grinder head for #32 1.5 HP electric grinder (SKU 540). This grinder head houses the auger, auger stud, knife, and plate. Parts are only included in part-specific promotions. -
Silicone Sealing Bar for MaxVac® 250 (1393)
$4.99This is the black rubber Silicone Sealing Bar for our MaxVac® 250 vacuum sealer. It is the straight rubber bar on the underside of the vacuum lid. It lines up with the heat bar on the base of the... -
Helical Step Gear for Meat Grinder (1113, 1224)
$3.99The helical step gear for resides within the motor housing of the unit. Parts are only included in part-specific promotions. -
Stainless Retaining Ring for #12 BigBite® Grinder (780, 780A, 1780)
$39.99Stainless steel retaining ring for #12 .75 HP electric grinder (SKU 780). This ring screws onto the front of the grinder head to hold in the knife, the plate, and the stuffing tube (if one is used)...