Products List
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Threaded Rod for 15 lb. Vertical Stuffer (607, 607SS)
$62.99Threaded rod for 15 lb. vertical stuffer, for models 607 and 607SS. Parts are only included in part-specific promotions. -
Base Washer for 5 lb. Vertical Stuffer (606, 606SS)
$2.49Base Washer for the 5 lb. vertical stuffer, models 606 and 606SS. The Base Washer is used with the Base Nut to attach the frame to the base of the unit. The Base Washer goes onto the screw before the... -
Heat Wire 1- 3mm for 1380
$3.99The 3mm Heating Wire for the 1380 MaxVac Pro Chamber Sealer. Should be purchased with the 1mm Wire (SKU:10104003) and Teflon Belt (SKU:10074001) Dimensions: 18.70" x 0.12" Material: Nickel -
Complete Air Release Valve (1606, 1606SS, 1569)
$6.99This is the Complete Air Release Valve for our 5lb. Might Bite Stuffers as well as our Bite Bite 10lb. Motorized Stuffer. Length: 1.42" Outer Dimensions: 0.80" Material: SUS304 Parts are only... -
Coarse Grinder Plate for #10 SS Hand Grinder
$9.99Replacement 10mm Plate for #058 #10 Tinned Clamp on Hand Grinder (with LEM on the side) and the #821 Stainless Steel Clamp on Hand Grinder. If the side of your grinder has Porkert or Alfa, they will... -
Bearing 1 for BigBite Mixers (1733, 1734, 1868, 1869)
$4.49Bearing 1 for our current generation BigBite Mixers. There are four of them located in the gear box (sold individually). Bearing labeled 6002z. It is labelled part 11 on our current generation... -
Heater for 20 lb. Smoker (738)
$8.99Heating element for 20 lb. smoker, model 738. The heating element is used to heat the smoker and is located inside of the unit on top of the heater bracket.View 738 Manual Here Parts are only... -
Threaded Rod for 5 lb. Vertical Stuffer (606, 606SS)
$21.99Parts are only included in part-specific promotions. -
Circuit Breaker for # 22 & 32 BigBite Grinders # 781, 781a, 782 & 782a
$4.99The BigBite Circuit Breaker resides within the motor housing. Parts are only included in part-specific promotions. -
Oil Cap with O-Ring for MaxVac Pro Chamber Sealer (1380)
$14.99Black Oil Cap assembly that is removed to fill oil reservoir. Also includes the rubber O-Ring that fits between the Oil Cap and the reservoir housing. Dimensions: D 1.46" x H 1.85" 2 piece... -
Drive Shaft Key for Tilt Mixers (1868, 1869, 868, 869)
$3.99Axle Drive Shaft Key for Tilt Mixers. The Drive Shaft Key attaches to the end of the Axle Drive Shaft. Parts are only included in part-specific promotions. -
Cylinder for 10lb Motorized Stuffer (1569)
$190.99Meat Cylinder for the BigBite 10lb. Motorized Stuffer (1569). Diameter: 6.3" Height: 9.84" Material: SUS304 View 1569 Manual Parts are only included in part-specif