Products List
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Small Spacer for BigBite Mixers (1733, 1734, 1868, 1869)
$3.99This snap ring holds the Axle Drive Shaft and middle Gear Shaft in place for our current generation BigBite Mixers. There are two in the gear box. One for each shaft (part sold individually)... -
Handle for Slotted Shaft for 25 lb. and 50 lb. Mixer (733, 733A, 734, 734A)
$32.99Handle for the 25 lb. or 50 lb. mixer, SKUs 733, 733A, 734 and 734A. This handle is for a slotted drive shaft.View 733A & 734A Manual Here Parts are only included in part-specific promotions. -
Main Gear Shaft for 10 lb. Motorized Stuffer (1569)
$46.99This is the main cylindrical gear that physically raises and lowers the threaded rod within the BigBite 10 lb. Motorized Stuffer. Part number 15 on the parts diagram. Construction: 45# Carbon... -
#8 Grinder Head for 2017+ BigBite Meat Grinder (1779)
$106.99This #8 Stainless Steel BigBite Grinder Head houses the BigBite Auger and attaches to the unit's Motor Housing. This part is for LEM BigBite Grinder (SKU 1779), made in 2017 or newer. Parts are only... -
Straight Step Gear for Meat Grinder (1113, 1224)
$3.99The straight step gear for resides within the motor housing of the unit. Parts are only included in part-specific promotions. -
Stainless Retaining Ring for #22 BigBite Grinder (1781, 1786, 1473)
$44.99Stainless steel retaining ring for #22 1 HP BigBite Grinder, SKU 1781 and DualGrind SKUs 1786 and 1473. This ring screws onto the front of the grinder head to hold in the knife, the plate, and the... -
Piston Gasket for 10 lb. BigBite Dual Gear Stuffer (1112)
$9.99Piston gasket for 10 lb. BigBite Dual Gear Stuffer (SKU 1112). The piston gasket fits into the groove on the piston. It acts as a buffer to keep the meat from coming back up the cylinder as the... -
Horizontal Gear Bushing (1606, 1606SS)
$3.99Horizontal gear bushing for the MightyBite 5 lb. Stuffer, SKUs 1606 and 1606SS. Construction: POM Dimensions: 1.20" length x 0.65" inner diameter Parts are only included in part-specific promotions. -
Axle Bushing for 25 lb. and 50 lb. Mixers (733, 734, 733A, 734A, 868, 869)
$3.99The Axle Bushing is located at the end of the Axle. The Axle Adjuster connects to the Axle Bushing. Diameter: 0.87" Length: 0.47" Material: PA1010 View 733 & 734 Product Manual -
Locking Screw Cover for #10 Tinned Hand Grinder (058)
$3.99Replacement Locking Screw Cover for #10 Tinned Clamp on Hand Grinder (SKU 058, with LEM on the side).This part is special to this grinder. You must make sure that your grinder head has LEM on both... -
Grinder Knife for #10 Stainless Steel Hand Grinder (058, 821)
$14.99Replacement knife for the #10 Tinned Clamp-on Hand Grinder (SKU 058, with LEM on the side) and Stainless Steel Clamp-on Hand Grinder (SKU 821). If the side of your grinder has Porkert or Alfa, they... -
Gear Shaft 2 for 10 lb. Motorized Stuffer (1569)
$39.99This is the second cylindrical gear within the BigBite 10 lb. Motorized Stuffer. Part number 6 on the parts diagram. Construction: 45# Carbon Steel Dimensions: .83" length x 3.07" width