Parts

This is the Phillips Head Screw that holds the gearbox cover to the unit. There are four on each unit (items sold separately). This is for all previous generations of our BigBite® Mixers (733, 734, 733a, 734a, 868, 869). If your mixer tub is three...

The Fast Drive Shaft for our 20lb. and 30lb. Motorized Stuffers. This is the lower cylindrical shaped outlet gear used when retracting the piston when hand stuffing sausage. The teeth on the splined tip of this gear can shear if the unit experiences a...

These poly meat stompers will keep your hands and fingers away from your grinder's moving parts. Use for pushing the meat into the grinder head.If you are not certain of your model number, or which meat stomper will fit your LEM meat grinder, first check...

Replacement gasket for BigBite® Grinders 1777, 1779, and 1780. Parts are only included in part-specific promotions.

This grinder knife (or cutting blade) works with the 1224, 1182, 1113, and 822 meat grinder models. This blade goes onto the stud, with the sharp side facing the plate, and cuts the meat. The knife is 8.8mm thick and 55.6 mm in diameter. Parts are only...

Fits all # 32 BigBite® Grinder Models made in 2006. If your BigBite® Grinder was made in 2007 or later, you will need to order # 01001029.Is this the correct part for you? There are 2 versions - one made in 2006 and one from 2007+.This # 32...

Plastic Tank Cover for the 20 lb. Manual Mixer model # 654. The Tank Cover is the removable lid of the unit. It does NOT securely attach to the Manual Mixer. Parts are only included in part-specific promotions.

Stainless steel retaining ring for #5 electric grinder, model #1777, #777, & #777A . This ring screws onto the front of the grinder head to hold in the knife, the plate, and the stuffing tube, if a stuffing tube is used. Actual product may differ...

Base Washer for the 15 lb. vertical stuffer, model # 607 & 607SS & 1607 & 1607SS.The Base Washer is used with the Base Nut to attach the frame to the base of the unit. The Base Washer goes onto the screw before the Base Nut.View 607 &...

The Slow Drive Shaft for our 20lb. and 30lb. Motorized Stuffers. This is the upper cylindrical shaped outlet gear the motor runs. Dimensions: L 0.55" x W 0.24" x H 0.24" Material: 45# Carbon Steel Parts are only included in part-specific promotions.

Rubber foot for the 17 lb., 4.2 gallon mixer, model # 654. Includes one foot that attaches to the bottom of the meat tank. Parts are only included in part-specific promotions.

This rubber pad gasket creates a seal between the two halves of the gearbox for our #5 BigBite® grinders made between 2011 and 2017. The gasket is in the shape of a rectangle with the top short side being oblong. If you have a #5 Grinder made before...