Parts

This driven roller will turn your 433J into a Tenderizer.This roller is not intended to be used with the 433A tenderizer attachment.

Stainless steel auger stud for # 5 electric grinder, model #1777, #777, & 777a. This stud screws into the auger and holds the knife and the plate.

This retaining ring fits our 15 lb. MightyBite Sausage Stuffers, SKUs #1607 & 1607SS, 607 & 607SS,1569, and our BigBite Motorized Stuffers, SKUs #1569, 1217, and 1219. The retaining ring slides over the stuffing tube and screws onto the front of the...

The Grease Seal for our current generation BigBite Mixers. Located within the tub on the gearbox side. Black rubber with spring tensioned center. Inner, outer, thickness dimensions in millimeters: 20-36-7. Outer Dimension: 1.38"Inner Dimension: 0.79"...

The Handle Screw attaches the handle to the grinder motor.View 780, 781 & 782 Product Manual M6 -1.0 x 15

Axle Adjusting Knob for the mixer model # 654, 868 & 869. The Axle Adjusting Knob is used with the Spring and the Brass Bolt to adjust the Paddle Axle. View 654 Product Manual

The black rubber feet for our MaxVac 250 vacuum sealer (set of 4). Dimensions: D 0.49" x H 0.16" Material: Silicone View 1393 Product Manual

The cutter group is the sliding blade with finger tab that cuts the vacuum bags in our Role Holder and Cutter (Found on our MaxVac 500 and 1000 series sealers as well as the stand alone bag holder unit #1252). If your cutter has become dull and will not...

This #12 Stainless Steel BigBite Grinder Head houses the BigBite Auger and attaches to the unit's Motor Housing. This part is for LEM BigBite Grinder model #1780, made in 2017 or newer.

All plastic. Parts # 1113-25 and # 1113-25A are NOT interchangeable. Please take note of the gear on your unit and order appropriately. The gear you need depends upon the length of the gear shaft that holds this gear in place. This all white gear will...