Parts

The Set Screw is used to attach the axel adjusting knob to the mixer. View 733 & 734 Product Manual View 1733 & 1734 Product Manual View 1868 & 1869 Product Manual View 868 & 869 Product Manual View 733A & 734A Product Manual

This one way stainless steel grinder knife is specifically designed to fit our #8 MightyBite Meat Grinder (1158). Our grinder knives are made to LEM's stringent standards for hardness and quality. Remember when changing your knife to change the plate at...

Includes drive gear, silicone washer, plastic washer, screw and steel washer. These parts will attach to the auger of your unit.When assembling the parts, it is very important that the silicon washer is on correctly and that the notch in the gear is...

Stainless steel retaining ring for # 8 BigBite Grinder, model #1779 and DualGrinders #1472 and #1784. This ring screws onto the front of the grinder head to hold in the knife, the plate, and the stuffing tube, if a stuffing tube is used. Retaining Ring...

Clear plastic Tank Cover for our current generation 25 lb. BigBite Mixers. This covers the meat while you are mixing. Dimensions: 12.76" x 11.89" x 0.16" Material: PS Caution: This part is for our current generation Stand and Tilt Mixers only...

Base Lock Washer for the 15 lb. vertical stuffer, model # 607 & 607SS.The Base Lock Washer is used with the Base Nut and Base Washer to attach the frame to the base of the unit. The Base Lock Washer is placed in between the Base Nut and the Base Washer...

This is the Phillips Head Screw that holds the gearbox cover to the unit. There are four on each unit (items sold separately). This is for all previous generations of our BigBite® Mixers (733, 734, 733a, 734a, 868, 869). If your mixer tub is three...

The Fast Drive Shaft for our 20lb. and 30lb. Motorized Stuffers. This is the lower cylindrical shaped outlet gear used when retracting the piston when hand stuffing sausage. The teeth on the splined tip of this gear can shear if the unit experiences a...

These poly meat stompers will keep your hands and fingers away from your grinder's moving parts. Use for pushing the meat into the grinder head.Note: If you are ordering a stomper to use with the #8 575 Watt Countertop Grinder, order SKU #01007004...

Replacement gasket for BigBite® Grinders 1777, 1779, and 1780.

This grinder knife (or cutting blade) works with the 1224, 1182, 1113, and 822 meat grinder models. This blade goes onto the stud, with the sharp side facing the plate, and cuts the meat. The knife is 8.8mm thick and 55.6 mm in diameter.

Fits all # 32 BigBite® Grinder Models made in 2006. If your BigBite® Grinder was made in 2007 or later, you will need to order # 01001029.Is this the correct part for you? There are 2 versions - one made in 2006 and one from 2007+.This # 32...