Parts

This Grease Seal is located in the grinder motor and is used to prevent grease leakage. If you see grease in the hub of the grinder, this seal may need to be replaced. This part works on our entire line of BigBite® Grinders, model # 777, 777a, 1777,...

Plastic Tank Cover for the 20 lb. Manual Mixer model # 654. The Tank Cover is the removable lid of the unit. It does NOT securely attach to the Manual Mixer.

Stainless steel retaining ring for #5 electric grinder, model #1777, #777, & #777A . This ring screws onto the front of the grinder head to hold in the knife, the plate, and the stuffing tube, if a stuffing tube is used.

Base Washer for the 15 lb. vertical stuffer, model # 607 & 607SS & 1607 & 1607SS.The Base Washer is used with the Base Nut to attach the frame to the base of the unit. The Base Washer goes onto the screw before the Base Nut. View 607 & 607SS Product...

The Slow Drive Shaft for our 20lb. and 30lb. Motorized Stuffers. This is the upper cylindrical shaped outlet gear the motor runs. Dimensions: L 0.55" x W 0.24" x H 0.24" Material: 45# Carbon Steel

Rubber foot for the 17 lb., 4.2 gallon mixer, model # 654. Includes one foot that attaches to the bottom of the meat tank.

This rubber pad gasket creates a seal between the two halves of the gearbox for our #5 BigBite® grinders made between 2011 and 2017. The gasket is in the shape of a rectangle with the top short side being oblong. If you have a #5 Grinder made before...

This 10mm Plate is ideal for a coarse grind, including the First Grind, Chili meat, Chorizo and Linguisa. Each plate is 2-3/8" diameter and has 10mm (3/8") plate holes.

Fits all # 22 BigBite® Grinder Models made in 2006. If your BigBite® Grinder was made in 2007 or later, you will need to order # 01001025.Is this the correct part for you? There are 2 versions - one made in 2006 and one from 2007+.This # 22...

The BigBite Circuit Breaker resides within the motor housing. View 1780 Product Manual

[No Product Description]