Shop All

This is the air release valve for the MaxVac 500 model #1253, 1088B & 1088. 1.88" x 0.75" x 1.38" DC 110V 75mA View 1253 Product Manual View 1088A Product Manual View 1088 Product Manual Parts are only included in part-specific promotions. 

The auger is the corkscrew type piece that sits in the head of the grinder. It takes the meat from the throat of the meat pan and pushes it through the head to the knife and the plate. Parts are only included in part-specific promotions.

Piston for 15 lb. vertical stuffers, model # 607 & 607SS & 1217 &1219. The piston attaches to the threaded rod and pushes the meat down through the cylinder and out to the stuffing tube. The gasket # 03025006 for this piston is not included,...

Main gear with splined drive shaft for #1777, #1779, #1780. View 1777 Product Manual Parts are only included in part-specific promotions.

Retaining ring for # 8 .35HP electric grinder, model # 535. This ring screws onto the front of the grinder head to hold in the knife, the plate, and the stuffing tube, if a stuffing tube is used. Parts are only included in part-specific promotions.

Piston gasket for MightyBite 15 lb. Stuffer, models #1607 & 1607SS, and 607 & 607SS. This Piston gasket also fits our BigBite Motorized Stuffers, models # 1217 & 1219. The piston gasket fits into the groove on the piston, Part #03047005. It...

This driven roller will turn your 433J into a Tenderizer.This roller is not intended to be used with the 433A tenderizer attachment.   Parts are only included in part-specific promotions.

  Parts are only included in part-specific promotions.

Stainless steel auger stud for # 5 electric grinder, model #1777, #777, & 777a. This stud screws into the auger and holds the knife and the plate.   Parts are only included in part-specific promotions.

This retaining ring fits our 15 lb. MightyBite Sausage Stuffers, SKUs #1607 & 1607SS, 607 & 607SS,1569, and our BigBite Motorized Stuffers, SKUs #1569, 1217, and 1219. The retaining ring slides over the stuffing tube and screws onto the front of...

The Grease Seal for our current generation BigBite Mixers. Located within the tub on the gearbox side. Black rubber with spring tensioned center. Inner, outer, thickness dimensions in millimeters: 20-36-7. Outer Dimension: 1.38"Inner Dimension: 0.79"...

The Handle Screw attaches the handle to the grinder motor.View 780, 781 & 782 Product Manual M6 -1.0 x 15   Parts are only included in part-specific promotions.