Shop All

#8 BigBite Stainless Steel Auger Fits BigBite Grinder #779A . This BigBite Auger is made of stainless steel and has a larger space at the beginning of the Auger Threading than ordinary augers, which grabs more meat. This BigBite Auger is for LEM Grinder...

The Handle attaches to the top of the motor housing for easy carrying. If you need the screws to attach the handle, please also order Handle Screw # 01034013.View 777 & 779 Product Manual Parts are only included in part-specific promotions. 

This Star Bolt is used to secure the head of the grinder to the motor of the grinder. Part for BigBite Grinders model #777, #777A, #1777, #779, #779A, #1779, #780, #780A, & #1780 Parts are only included in part-specific promotions. 

Axle with Paddles for the 50 lb. Tilt Mixer (SKU: 868). The Axle with Paddles is the part that actually mixes the meat. Depending upon the reason for replacement, you may also need Axle Bushing, Axle Adjuster, Axle Drive Shaft and Drive Shaft Key. See...

Complete Gearbox for Splined Drive for the 25 lb. Mixer model #733A & 734A. Dimension: 8.75" x 3.94" x 4.25" View 733A & 734A Product Manual Parts are only included in part-specific promotions. 

Piston for the stuffer model #1606 & 1606SS. The piston attaches to the threaded rod and pushes the meat down through the cylinder and out to the stuffing tube. Diameter: 4.80" H 0.94" Material: PP View 1606 Product Manual Parts are only included...

The silicone o-ring Piston Gasket for the BigBite 10lb Motorized Stuffer (1569) (it will not fit any of our other stuffers). Diameter: 5.04" Thickness: .25 Material: Rubber (NBR) View 1569 Manual Parts are only included in part-specific promotions...

Black retaining rings for the end of the Jerky Cannon tube. The retaining ring holds the nozzles on the meat tube. Fits the Original Jerky Cannon and our Jerky Gun. Parts are only included in part-specific promotions. 

Stainless auger stud for #8 .35HP electric grinder, model #1779, #779A, #779. This stud screws into the auger and holds the knife and the plate. Parts are only included in part-specific promotions. 

This is the Cutter Group for our MaxVac 250 vacuum sealer. It is the full swing arm assembly with the cutting blades preinstalled (the blades are not sold separately). This will not work with the MaxVac 500, 1000, or 1252 MaxVac Roll Holder and Cutter...

Axle with Paddles for the 20 lb. Manual Mixer model # 654. The Axle with Paddles is the part that actually mixes the meat. Depending upon the reason for replacement, you may also need other parts. See the manual below for more details and where these...

This Drive Gear Shaft Combo only works with the black bushings, not the roller bearings, and is only for Grinders made 2006 +. If you are questioning if this is the right part for you, please call us directly at 1.877.336.5895 for assistance.If you're...